Instruction Manual

MULTI-SHOT

SINGLE SHOT

3. LOADING

A) SINGLE SHOT

• Point the air rie in a SAFE DIRECTION.

• Cock the rie by pulling the bolt backward to the open

position until a click sound is heard.

• With the bolt open, insert the single shot tray from the

left side of the breech (Fig 4). The ridge on the tray will

match the breech groove. Then place one pellet into the

loading port, head rst. Load no more than one pellet at

a time for SINGLE SHOT.

B) LOADING THE MAGAZINE

• Rotate the clear faceplate counter-clockwise. Load the

rst pellet into the exposed hole on the backside of the

magazine, skirt rst (Fig 5). Flip the magazine over and

rotate the clear faceplate clockwise, loading a pellet head

rst into each exposed slot until the magazine is full.

C) MULTI-SHOT

• With the bolt open, insert the magazine from the left

side of the breech (Fig 6). The ridge on the magazine will

match the breech groove.

• Close and lock the bolt by pushing the bolt handle

forward and down until rm resistance is felt (Fig 7).

Fig 4

LOADING THE MAGAZINE (MULTI-SHOT)

Fig 6

LOADING THE MAGAZINE (MULTI-SHOT)

Fig 7

Fig 5

WARNING:

DO NOT INHALE DUST FROM LEAD

PROJECTILES OR PUT THEM IN YOUR

MOUTH. WASH HANDS AFTER HANDLING

LEAD. LEAD PELLETS CONTAIN LEAD,

A CHEMICAL KNOWN TO THE STATE OF

CALIFORNIA TO CAUSE CANCER AND

BIRTH DEFECTS

(OR OTHER REPRODUCTIVE HARM).