Instruction Manual

2. COCKING AND PUMPING

A) COCKING

Lift the bolt handle (see Fig 2) and pull back

until you hear a "click" sound. This will indicate

the rie is cocked.

NOTE: You must cock the rie before pumping.

Pressure will not build if the rie is not cocked.

B) PUMPING

After cocking the rie, pull the forend down and extend it away from the action to it's maximum

extended position. Once fully extended, press it back to its original position inline with the stock

(Fig 3). This is a full pump stroke.

NOTE: Pumping will increase in difculty with each pump up to the maximum of 8 pumps.

CAUTION:

DO NOT PUMP THIS RIFLE MORE THAN 8 TIMES PER

SHOT. OVERPUMPING DOES NOT INCREASE POWER

AND MAY DAMAGE THE RIFLE.

Fig 2

Fig 3

CAUTION: PINCH POINT

KEEP YOUR HANDS CLEAR

OF THE HIGHLIGHTED AREA

WHILE OPERATING THE PUMP MECHANISM.