User Manual

Step 3
Note the sizing number on
the adjustable strap that is
closest to the fixed strap.
Step 4
Remove the unit from
the client’s ankle.
Slide the post on the hinge
assembly into the sizing
hole numbered three more
than the number you noted
instep3.Forexample,if
you noted the strap sizing
number 7 in step 3, you will
slide the hinge post into the
strap hole numbered 10.
Post
Sizing Number
•8-90-00130-0,RevisionA•98•BIExacuTrackOneQuickInstallationGuide•8-90-00130-0,RevisionA
SIZING: STEPS 14
Size the tracking unit while the client is standing. The tracking unit must
be installed on the narrowest part of the bare ankle. When properly
installed, the tracking unit should meet resistance when rotated around
the front and back side of the ankle.
To Size the Tracking Unit >
Step 1
Wrap the adjustable strap
around the client’s ankle
and under the fixed strap.
Step 2
Wrap the fixed strap around
the client’s ankle and over
the adjustable strap.
Fixed Strap
Adjustable Strap