User's Manual

SENDUM WIRELESS, CORP.
1 Purpose
The purpose of this guide is to describe the basic features of the GT200.
2 Introduction
2.1 What is a GT200
¾ The GT200 is a wireless tracking device which operates on the CDMA network
using assisted GPS for location.
¾ It is used for tracking valuable assets (such as tools, machinery, etc) in
construction sites.
2.2 How does a GT200 work
¾ It establishes a data connection through either the cellular or the PCS band similar
to a mobile phone.
¾ A user can send a SMS message through an internet connection or a mobile phone
to the device by calling its phone number. The device gets its location and send it
back to the user via the CDMA network.
3 Getting Started
3.1 Battery Tips
Battery life depends on the network, signal strength, temperature, features, and
accessories you use.
¾ Always use Sendum Original batteries and battery chargers. The warranty does
not cover damage caused by non-Sendum batteries and/or chargers.
¾ New batteries or batteries stored for a long time may take more time to charge.
¾ When charging your battery, keep it near room temperature.
¾ When storing your battery, keep it uncharged in a cool, dark, dry place, such as a
refrigerator.
¾ Never expose batteries to temperatures below -10°C (14°F) or above 45°C
(113°F). Always take your device with you when you leave your vehicle.
¾ It is normal for batteries to gradually wear down and require longer charging
times. If you notice a change in your battery life, it is probably time to purchase a
new battery.
Contact your local recycling center for proper battery disposal.
Warning: Never dispose of batteries in a fire because they may explode.
Before using your device, please read the battery safety information in the Safety and
General Information section included in this guide.