Operation Manual

54 Sendo X User Guide
4
Speed dials and voice
• Voice Contacts - Simply say the name of a
contact you have stored in your Contacts list to
display the contact details. You can then press
Call c to call the contact.
• Open - Simply say the name of a feature you
want to open.
z Warning: Do not use the voice dialling features
for emergency calls. At times of stress, your
voice may not be clear enough for the phone to
recognise.
! To make a call using Name Dialling
1. Press and hold the Voice key t.
2. When prompted, say the command “Name
Dial” clearly into the microphone.
3. When prompted, say the name of the contact
you wish to call, clearly into the microphone. You
must say the name exactly as it appears in your
Contacts list.
4. If you have more than one number stored for the
contact, you will be prompted to say the number
(home, work, etc.) that you wish to call.
z Note: If a name is not fully understood or there
are several close matches, you will be prompted
to select from a list of possibilities. Simply use
the joypad keys to scroll to your selection and
press Select  or confirm your choice by saying
“Yes” or “No” when prompted.
5. If all commands and names have been
recognised, the contact number will be dialled.
! To make a call using voice contacts
1. Press and hold the Voice key t.
2. When prompted, say the command “Contacts”
clearly into the microphone.
3. When prompted, say the name of the contact
you wish to display, clearly into the microphone.
You must say the name exactly as it appears in
your Contacts list.
z Note: If a name is not fully understood or there
are several close matches, you will be prompted
to select from a list of possibilities. Simply use
the joypad keys to scroll to your selection and
press Select  or confirm your choice by saying
“Yes ” or “No” when prompted.
4. If all commands and names have been
recognised, the contact will be displayed. You
can now scroll to the contact number and press
Call c to dial the number.
! To open a feature using voice commands
1. Press and hold the Voice key t.
2. When prompted, say the command “Open”
clearly into the microphone.
3. When prompted, say the name of the feature
you wish to open.
4. If the command and feature name have been
recognised, the feature will be opened.