Operation Manual

53 Sendo X User Guide
4
Speed dials and voice
Chapter 4 Speed dials and voice commands
This chapter looks at speed dials and voice
commands, and how to use them.
Speed dial
Once you have set up a speed dial you can make a
phone call or open an Email by only pressing one
key.
z Note: You can only create speed dials for
contact stored in your Contacts list.
! To create a speed dial
1. From the Menu screen, scroll to the Tools icon
and press Select .
2. Scroll to the Speed Dial icon and press Select .
3. Scroll to a free number shown in the display and
press Options g and select Assign.
z Note: Speed dial 1 1 is reserved for
voicemail access and cannot be changed.
z Note: Keys 2 2 and 3 3 are also
reserved and are used to activate the WAP
browser and Camera.
4. Select the contact and number you would like to
assign to this speed dial number.
! To use a speed dial
1. Enter the speed dial number that you have
assigned, using the numeric keypad.
2. Press Call c.
! To use a speed dial using one-key dialling
Simply press and hold the number key associated
with the feature you wish to use. There is no need to
press Call.
z Note: One-key dialling only works if the
phone’s one-key dialling setting is switched on.
See Call settings on Page 42 for more
information.
! To delete a speed dial
1. From the Menu screen, scroll to the Tools icon
and press Select .
2. Scroll to the Speed Dial icon and press Select .
3. Select the speed dial to delete, then press
Options g and select Remove.
4. You will be prompted whether you want to
remove the speed dial. Press Yes g.
z Note: It is not possible to edit a speed dial. If
you want to amend a speed dial number, you
should delete it and then create a new one.
Voice commands
Your Sendo X phone incorporates very useful voice
command features. Unlike many other phones, it
uses voice recognition, meaning you don’t need to
train the phone to understand your voice or record
voice tags. You can use voice commands in three
ways:
• Name Dialling - To call a contact you have stored
in your Contacts list, simply say the name of the
contact.