Operation Manual

47 Sendo X User Guide
3
Settings and Profiles
z Note: Automatic update is a network service.
Contact your service provider to find out about
subscribing to this service.
Select Date and time settings to display the following
settings:
Security settings
Use the security settings to enable the phone lock
and the PIN lock for the SIM card. You can also view
any digital security certificates that may be stored in
your phone.
Phone and SIM
Select Phone and SIM from the Security settings list to
display the following settings:
• PIN code request - Switching this setting to On
means that every time you switch the phone on,
you will be required to enter your PIN (Personal
Identification Number) code before you can use
the phone (except to make an emergency call).
z Note: You may not be able to deactivate the PIN
code request. Check with your service provider
if you are not sure.
•PIN code - Change your PIN code. The (4 to 8
digit) PIN code protects your SIM card against
unauthorised use. Your PIN code should be
provided with the SIM card.
•PIN2 code - Change your PIN2 code. This is an
additional (4 to 8 digit) PIN code used to access
certain services. Not all SIM cards have a PIN2
code.
•Lock code - Change your lock code. This is a (5
digit) code used to lock the phone to stop others
using it, or to prevent keys being pressed
accidentally, for example, when the phone is in
your pocket.
z Note: The default lock code for your phone is
12345. For security purposes, you should
change this code immediately, and keep the
new code secret.
• Autolock period - Enter a time period (in minutes)
after which the phone will automatically lock
itself, if no keys have been pressed, or select
None to disable the autolock.
Select this To
Time Enter the current time.
Date Enter the current date.
Date format Decide how the date should be formatted, e.g.
DD:MM:YY.
Date
separator
Choose how the fields in a displayed date
should be separated, e.g., by a colon (:) or a
line (|).
Time format Decide how the time should be formatted, e.g.
24-hour or 12-hour clock.
Time
separator
Choose how the fields in a displayed time
should be separated, e.g., by a colon (:) or a
line (|).
Clock type Select an Analogue or Digital clock display.
Automatic
update
Switch the setting On to have the date and time
updated automatically, if you subscribe to this
network service.