Operation Manual
43 Sendo X User Guide
3
Settings and Profiles
another call is active. Select Activate to activate
the call waiting service, Cancel to de-activate it,
or Check status to check whether call waiting is
active or not.
z Note: Check with your service provider to find
out if this service is available.
• Automatic redial - If you select On, your phone
will make a maximum of ten attempts to re-dial a
number after an unsuccessful call attempt. Select
Off to turn automatic redial off.
z Note: You can stop the redialling process by
pressing the End f key.
•Summary after call - Select On if you want the
phone to briefly display the duration and cost of
a call when it has ended. To display the cost, you
must have the Call cost limit option activated for
your SIM card. See Setting a call cost limit on
Page 40.
• One key calling - Switching this setting to On
enables you to make a call by simply pressing
and holding one key, after you have set up a
speed dial. See Speed dial on Page 53 for more
information.
•Anykey answer - Switching this setting to On
enables you to answer an incoming call by
pressing any key, rather than only being able to
use Call c, and the soft keys. Select Off to
disable this function.
•Line in use - This setting is only shown if the SIM
card supports more than one phone line. Select
which line you want to use to make calls and
send text messages, or select Disable to prevent
line selection.
z Note: Check with your service provider to find
out if this service is available.
Voice settings
In Voice settings, you can select voice recognition
options.
Choice Lists
Choice Lists display a list of close matches when
using the voice dialling features. If disabled, the
closest match will be chosen automatically.
•Name Dial - Select On to enable Choice lists for
the Name Dial feature.
• Contacts - Select On to enable Choice lists for
the Voice Contacts feature.
Recognition
• Sensitivity - Use the slider to set the sensitivity of
the microphone for voice recognition.
• Speed and Accuracy - Use the slider to set the
balance between speed and accuracy of voice
recognition.
•Open <App> Editor - Use the joypad keys to
scroll through the list of phone features, and
press Select to enable/disable the feature. If
enabled, you can use the Voice Open feature to
open any of the selected features.