Operation Manual

40 Sendo X User Guide
2
Phone Calls
z Note: The actual invoice for calls and services
from your service provider may vary, depending
upon network features, rounding-off for billing,
etc.
! To reset the call costs counter
1. Open the Call costs feature.
2. Press Options g and select Clear counters.
3. You will be prompted to enter the phone’s PIN2
code. See Security settings on Page 47 for
details.
4. Press Ok g.
Setting a call cost limit
This feature enables you to set a maximum limit for
your outgoing call costs which cannot be exceeded.
If your accumulated calls do exceed this cost, you
will not be able to make any further calls (with the
exception of Emergency calls) until the call cost
counter is reset, or the call cost limit is changed or
switched off.
See Log settings for more information.
GPRS data counter
This allows you to check the amount of data (in
kilobytes) sent and received during packet data
(GPRS) connections.
z Note: This service may not be available on your
phone. Contact your service provider if you are
unsure.
! To view GPRS data counter
1. Open the Log.
2. Scroll to GPRS counter and press Select .
! To reset the GPRS data counter
1. Open the GPRS counter feature.
2. Press Options g and select Clear counters.
3. You will be prompted to enter the phone’s lock
code. See Security settings on Page 47 for
details.
4. Press Ok g.
z Note: The GPRS counter reset feature may not
be available on your phone. Contact your
service provider for more information.
Log settings
In the Log feature, press Options g and select
Settings. The following Log settings are available:
Select this To
Log duration Set the length of time which log
information is stored for: 0, 1, 10, or
30 days. After this time, details are
erased in order to free memory.
Show call duration Enable/disable the current duration of
an active call to be displayed on screen.
Show costs in Select whether call costs are displayed
in units or in currency.
Call cost limit Set a call cost limit which cannot be
exceeded.