Operation Manual

24 Sendo X User Guide
1
The Basics
! To turn off phone autolock
1. From the Menu screen, scroll to the Settings icon
and press Select .
2. Select Security, then Phone and SIM, and then
Autolock period. Select None to disable the
autolock.
Locking the SIM card
Locking your SIM card should prevent use of the
phone to make a call, but you can still turn it on and
make emergency calls. When you switch your phone
on, you may be prompted for your PIN1 password,
which you must enter correctly before you can use
your phone.
If you forget your PIN1 password, you must enter a
PUK (Personal Unlock Key). This may be listed in the
information that you received with your SIM card or
it may only be available from your service provider.
z Note: Sendo cannot provide your PUK code.
Contact your service provider for information.
! To lock the SIM card
1. From the Menu screen, scroll to the Tools icon
and press Select , and then scroll to the
Settings icon and press Select .
2. Select Security, then Phone and SIM, and then
switch the PIN code request setting to On. Press
OK g.
! To unlock the SIM card
1. From the Menu screen, scroll to the Settings icon
and press Select .
2. Select Security, then Phone and SIM, and then
switch the PIN code request setting to Off. Press
OK g.
Total Reset
There is a function which allows you to reset your
phone; that is, restore all the settings and defaults
that were in place when you purchased it.
z Warning: This function removes all applications
and data from the internal phone memory that
you may have added. Any applications or data
on a memory card will NOT be lost.
You should only use this function if you have no
other alternative. For example, if you have forgotten
or lost the passwords to unlock your phone or you
have installed an application which has damaged or
corrupted the phone.
z Tip: If you synchronise with your PC regularly,
you should be able to retrieve your Outlook
data, for example Contacts, Calendar and so
on, when you synchronise with your PC again.
z Tip: Use the Backup feature in the Sendo PC
Connect software when you add any new
applications, or after changing a lot of data.
You could then use the Restore feature, also in
the Sendo PC Connect software, to minimise
data loss.