Operation Manual

149 Sendo X User Guide
18
Connectivity
z Note: For details on using Sendo PC Connect,
click select Help > Help topics from the Sendo
PC Connect menu.
Sync - remote synchronisation
The Sync feature enables you to synchronise your
calendar or contacts with various calendar and
address book applications on a compatible
computer or on the Internet. Synchronisation takes
place over a GSM data call or GPRS packet data
connection.
The synchronisation application uses SyncML
technology for synchronisation. For information on
SyncML compatibility, please contact the supplier of
the calendar or address book application you want
to synchronise your phone data with.
! To create a new synchronisation profile
1. If no profiles have been defined, you will be
asked if you want to create a new profile. Press
Yes g. To create a new profile in addition to
existing ones, press Options g and select
New sync profile. Choose whether you want to
use the default setting values or copy the values
from an existing profile to be used as the basis
for the new profile.
2. Define the following:
• Sync profile name - Write a descriptive name for
the profile.
•Bearer type / Host address / Port / HTTP
authentication - Contact your service provider or
system administrator for the correct values.
•Access point - Select an access point you want to
use for the data connection. For more
information, see Connection settings on Page 44.
•User name - Your user ID for the synchronisation
server. Contact your service provider or system
administrator for your correct ID.
• Password - Write your password. Contact your
service provider or system administrator for the
correct value.
•Calendar - Select Yes if you want to synchronise
your calendar.
•Remote calendar - Enter a correct path to the
remote calendar on the server. This must be
defined if the previous setting Calendar has been
set to Yes.
• Contacts - Select Yes if you want to synchronise
your contacts.
•Remote contacts - Enter a correct path to the
remote address book on the server. This must be
defined if the previous setting Contacts has been
set to Yes.
3. Press Done g to save the settings.