Operation Manual

145 Sendo X User Guide
18
Connectivity
Infrared
Your phone has an infrared port which enables it to
connect to other devices using infrared. The port is
located on the left side of your phone (see Your
phone layout - front view on Page 6). You can
connect your phone with any other device that has
an infrared port. An infrared connection can only be
made if the two devices are in close proximity,
preferably less than one metre apart.
z Warning: Do not point the infrared beam at
anyone's eye or allow it to interfere with other
infrared devices.
! To send data via an infrared connection
1. Locate the data item that you want to send. For
example, to send contact details, open Contacts,
or to send a photo, open the Photo Album. Use
the joypad to highlight the item.
2. Press Options g and select Send, then Via
infrared. The intended recipient must also
activate the infrared port on their device.
3. Point the infrared port on your phone directly at
the infrared port of the device you are sending
data to, ensuring there are no obstacles in the
way. The devices should be no further than 1
metre apart. Data can now be sent.
z Note: A Sending data message will appear on
the screen when data exchange begins. If this
has still not appeared one minute after
activating the infrared connection, you should
start the sending procedure again from the
beginning.
! To receive data via an infrared connection
1. In the Menu screen, use the joypad to scroll to
the Connectivity icon, and press Select .
2. Scroll to Infrared and press Select . Your
infrared port is now activated.
3. Make sure that your phone’s infrared port is
pointing directly at the infrared port of the device
which is sending the data, and that there are no
obstacles in the way. The devices should be no
further than 1 metre apart.
Once the data has been received, it will appear in
your Inbox folder in Messaging, like any other type
of new message. You can then open it in the normal
way. See Inbox on Page 69 for more information.
Modem
Your phone can act as a modem or as a fax modem
for your PC.
! To use the phone as a modem
1. Make a Bluetooth or infrared connection with
your PC. See see Bluetooth on Page 142 or
Infrared on Page 145 for details.
2. If a connection is established, simply select your
Sendo X phone as a modem on your PC. This is
normally configured in the Windows Control
Panel, but you should refer to your PC software
documentation for details of how to do this.
! To use the phone as a fax modem
1. From the Menu screen on your phone, scroll to
the Connectivity icon and press Select .