User guide

9
3
Getting started
Powering up/down
To switch the phone on, press δ.
If the phone asks for a PIN code, enter the
code that is supplied with the SIM card. The
code will be displayed as asterisks. When
complete, press
γ, OK.
Wait a few seconds while the phone
searches for the network. Once the network
has been found, the main screen appears
and your phone is ready to be used. The
main screen shows the network name and
two icons giving the signal strength (top
right) and battery level (top left).
To switch the phone off, press and hold
δ.
Screensaver
A screensaver is a picture that is displayed
when the phone has been idle for a certain
amount of time. It is possible to turn this on
or off, select the delay before it becomes
active and change the picture. To modify
the screensaver settings, press
γ, Menu,
select the Settings menu and then select the
Screensaver option.
ζ Note: When the screensaver is
displayed, press
χ to return to normal
display and use the phone.
Power save
To get better battery performance, your
phone will automatically switch to power
save mode after approximately 2 minutes of
inactivity. In this mode, the screen’s
backlight is switched off and a clock is
displayed showing the current time.
ζ Note: When the power save mode is
active, press
χ to return to normal
display and use the phone.
Leaving the battery in hot or cold places, such as in
a closed car in summer or winter conditions, may
reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15°C and
25°C (59°F and 77°F). A phone with a battery that
has been exposed to temperature extremes may
temporarily not work, even when the battery is fully
charged.
Dispose of the battery properly. Comply with all
local laws or regulations in disposing of your battery.
Do not dispose of batteries in a fire.
Note