User Manual

7
5. Insert the PC Card into the PCMCIA slot of your computer.
6. A warning message would pop up while installation, the message
shows this driver need the “digital signature”, and click the Yes button.
7. Make sure that the network protocol parameters are set correctly for
your computer. These include the IP address, subnet mask, gateway
and DNS. If you are unfamiliar with how to set network protocol
parameters, refer to Chapter 3 Connection to Network for details.
8. Restart your computer for changes to take effect.
Note
1. If your computer running Windows 95/98/ME/2000/NT installed
Wireless LAN PC card and you would like to upgrade to Windows XP,
you have to remove Wireless LAN PC card driver & utility from your
computer in advance to let the Wireless LAN PC card work with
Windows XP properly.
2. Please follow the procedure: click Start button, select Program, point
to Wireless LAN PC Card, and then click Uninstaller to uninstall the
driver and utility automatically
3. Once you finish removing the driver and utility, please refer to the
above installation procedure for Windows XP.
8
Uninstallation Procedure:
1. Insert the Wireless LAN PC Card into the PCMCIA slot.
2. Right click My Computer--->Select Properties.
3. On the Hardware tab, choose Device Manager, and click Network
Adapter.
4. Choose Wireless LAN PC Card and remove it.
5. After removing the Wireless LAN PC Card, restart your computer.