User Manual

3
Infrastructure Mode
The infrastructure mode requires the use of an access point (AP). In this
mode, all wireless communications between two computers have to be via
the AP no matter the AP is wired to Ethernet network or stand-alone.
If wired to an Ethernet network as shown in Figure 1-4, the AP serves as a
bridge and provides the link between the server and the wireless clients.
The wireless clients can move freely throughout the coverage area of the
AP while remaining connected to the server. Since the AP is connected to
the wired network, each client would have access to server resources as
well as to other clients.
Figure 1-4 Infrastructure mode
4
Chapter 2. Installing Drivers & Client Utility
This chapter describes how to install the PC Card drivers and client utility
under Windows 95/98/ME/2000/XP.
2.1 Installation for Windows 95/98/ME/2000/XP
Installation Procedure:
1. Turn on your computer.
2. Insert the Wireless LAN Driver CD into your CD-ROM drive. Run it by
selecting RUN from the Start menu and running PrismWin.exe or just
double click the PrismWin.exe from CD-ROM drive.
3. The setup information will shown as Figure 2-1. Follow the instructions
as they appear.
Figure 2-1