User's Manual
88
Dial-in Authentication
Selects the authentication protocol
for the corresponding dial-in
interface
None
6.1.3 Telnet/Console
Parameter Description
Default Value
Maximum User
Set the maximum number of the
users that can login the AP
through Telnet session at the
same time
2
Telnet Port
The port number for Telnet
Program
23
Console Port
The communication port that is
used to login the AP
COM1
ID Number Index for Telnet users
1
User Name User name for Telnet session
user1
Privilege
Select the user’ s privilege level
for Telnet session
Unlimited
Max. Screen Line
Set the maximum number of
lines displayed on the screen
24
Show Mode
Select the type of display for
Telnet session
(Command/Menu mode)
Menu
Keyboard Type
Select the type of the keyboard
for Telnet session
VT100
6.1.4 ISP
Parameter Description
Default Value
ISP Name
Name of Internet Service
Provider
ISP-1
89
Phone Number
The phone number that is used
to dial up your ISP
Note: The phone number must
enter direct line phone number
12345678
Username The user name used to login ISP
user
Password The password used to login ISP pass
6.1.5 DHCP
Parameter Description
Default Value
DHCP Client Setting
Enable or disable the specified
interface to obtain an IP address
automatically
Disable
Trigger DHCP Service
Enable or disable automatic IP
address assignment to wireless
stations
Disable
Default Gateway
IP address of the gateway for
default route when TCP/IP
filtering
192.168.1.1
Net Mask
Consists of four sets of digits
that help divide a network into
sub-networks and simplify
routing and data transmission
255.255.255.0
Name Server IP address of the DNS host 192.168.2.254
DHCP Start IP IP starting address 192.168.1.240
DHCP End IP IP ending address 192.168.1.254
Interface
Select the interface to provide
DHCP service
HWLAN
Fixed Host Entry
Define a fixed Ethernet-to-IP
address mapping to limit the
client station with the Ethernet
address to get the IP address