User's Manual

40
configured in step 1. After that, follow the default setting and Click the OK
button to return to the Interface Parameter window. Finally, you need to
click FINISH at the bottom of this page to complete the modification of
this page.
Figure 3-8
41
Figure 3-9
Hint1: Make sure interface 4 within status Disable.
Hint2: Choice the NAT(PAT) in every interfaces to enable NAT
service. For example, make sure PPPoE interface within
NAT(PAT) On and others are Off, it means that every
communications through the PPPoE interface needs NAT
transfer.