User's Manual

20
Step 2: Configure the operation mode of this RB (as shown in Figure 2-7)
Click Quick Config, select central Wireless Bridge operation mode and
then click NEXT at the bottom of this page to complete the modification of
this page.
Figure 2-7
21
Step 3: Configure TCP/IP parameters (as shown in Figure 2-8)
In this page, enter the Bridge IP Address (default is 192.168.2.1) and
Bridge Subnet Mask (default is 255.255.255.0) that are suitable for your
network domain. After that, click NEXT at the bottom of this page to complete
the modification of this page.
Figure 2-8