User's Manual

52
7.1.5 Wireless LAN
Parameter Description
Default Value
Regulatory Domain
Define the regulatory domain to
Which this NIC may be deployed
1
Channel USA: 1~11, Europe: 1~13 1
RTS Threshold
Set RTS (Request To Send)
threshold value
1600
Fragmentation
Threshold
Set fragmentation threshold
value
1600
SSID
Wireless LAN service area
identifier of the RB (case
sensitive)
wireless
Hide SSID Yes or No No
Deny ANY Yes or No No
Station Name Show the name of the AP ap
WEP Key
Push the “KeyGen” button to
generate the WEP key patterns
automatically
wepkey
WEP
1. WEP128
2. WEP64
3. Disable
Disable
Default Key
Select a WEP key to encrypt
each frame transmitted from
the radio using one the of the 4
Keys from the Key Panel
1
Key Panel
When you use WEP to
communicate with the other
wireless clients, all the wireless
devices in this network must
have the same encryption key
or pass phrase.
Note: each key must consist
of hex digits, it means that
only digit 0 -9 and letters A-F
53
are valid entries. If entered
incorrectly, program will not
write keys to a driver.
7.2 Utility
7.2.1 Software Upgrade
Parameter Description Default Value
TFTP Server IP
Address
Specify the IP address of the
TFTP server to upgrade the
firmware of the RB
192.168.2.100
Program Image soho.bin
Upgrade Filename
Web Image pfs.img
7.2.2 Administration
Parameter Description Default Value
Supervisor ID Supervisor’s identity code root
Supervisor Password Supervisor’s password root
Password Confirm Confirm the password again root