User's Manual

46
Network Information
Protocol Supported TCP/IP
NAT/NAPT
Virtual Server
DHCP client
DHCP server
PPPoE
Bridge
Security PPP PAP/CHAP/MS-CHAP
Authentication in Web-Based
manager
IEEE 802.1x Port-Based network
access control
Radius client (Authentication &
Accounting)
MAC address based access control
64-bit, 128-bit WEP encryption
802.11 SSID hidden
Denial 802.11 “Any” station
Management
Local Configuration RS-232 serial port
Remote Configuration HTTP, SNMP
Firmware Upgrade Upgrade via Serial Interface or TFTP
Physical Specifications
Dimensions 211(L) mm x 151(W) mm x 40(H) mm
Weight 1000 g
47
Chapter 7. Default Settings
7.1 General Configuration
7.1.1 System
Parameter Description Default Value
Host Name Host name for the RB HWLAN
Operation Mode
1. Central Bridge
2. Remote Extension
Bridge
3. Central Router with
PPPoE client Ethernet
connection
4. Central Router with
DHCP client Ethernet
connection
5. Central Router with
Static IP Ethernet
connection
6. Remote Extension
Router
Central Bridge
Bridge IP Address
192.168.2.1
Bridge Subnet Mask
For CRB /RRB with Bridge
Operation Mode
255.255.255.0
PPPoE User Name
user
PPPoE Password
pass
Password Confirm
For Central Router with
PPPoE client Ethernet
connection only
pass
IP Address
192.168.1.1
Wireless Interface
Address
Subnet Mask
255.255.255.0
IP Address
192.168.2.1
Ethernet-WAN Interface
Address
Subnet Mask
255.255.255.0
IP Address
192.168.2.1
Ethernet-LAN Interface
Address
Subnet Mask
255.255.255.0
NAPT Interface
1. None
2. Wireless LAN
None