User's Manual

4.7 Security

4.7.1 MAC based Access Control

1. Click Basic Config, select MAC Filter page, and choice the MAC Filter

services is Enable or Disable (as shown in Figure 4-11).

2. You can specify the MAC address of a wireless client station. All MAC

entries in the MAC address table are permitted to connect into the RB.

You can also click ADD, DELETE, MODIFY button to maintain this

MAC address table. After that, click FINISH at the bottom of this page

to complete the modification of this page.

Figure 4-11

4.8 Utility

4.8.1 Software Upgrade

1. Click Utility, select Software Upgrade page (as shown in Figure 4-

12), and then you can use TFTP to upgrade your AP. In here, you must

specify the TFTP server IP and select which file you want to upgrade it

(Program image, Web image), then click OK button to start the TFTP

upgrade process.

2. If the upgrade process is success, the AP will apply the new settings

and start rebooting right away.

Hint: You must set up a TFTP server and this server must contain one