Manualshelf

User's Manual

ManualsBrandsSendFar Technology ManualsComputers & AccessoriesWireless Access Point
12345678910
10
2.1.3 Wireless Access Router with dynamic IP Ethernet
connection
1. Set the Outdoor AP as a Router (Wireless Interface IP is
192.168.1.1, must turn on NAT on Ethernet Interface and turn off NAT
on Wireless interface).
2. Enable DHCP client on the Ethernet Interface of the Outdoor AP
(This AP will got IP / Gateway / DNS from the DHCP server).
3. Set Wireless parameters on the Outdoor AP: Channel (1) and SSID
(wireless)
4. Turn on DHCP server on the Outdoor AP and assign IP address to
PC1, PC2 and PC3.
6. Set Wireless parameters on client stations PC1, PC2 and PC3:
SSID (wireless).
11
2.1.4 Wireless Access Router with static IP Ethernet
connection
1. Set the Outdoor AP as a Router (Wireless Interface IP is
192.168.1.1, Ethernet Interface IP is 192.168.2.1, must turn on NAT on
Ethernet Interface and turn off NAT on Wireless interface, default route
is 192.168.2.254).
2. Set Wireless parameters on Outdoor AP: Channel (1) and SSID
(wireless)
3. Turn on DHCP server on the Outdoor AP and assign IP address to
PC1, PC2 and PC3.
4. Set Wireless parameters on client stations PC1, PC2 and PC3:
SSID (wireless).