User's Manual

34
Figure 3-18
35
3.10 Configuration Review and Apply the New
Settings
1. Click Basic Config or Advence Config and select the Configuration
Review page. This page (as shown in Figure 3-19) will present the
current configuration settings the operator has made.
2. Click Basic Config or Advence Config and select the Save & Restart
page. In this page (as shown in Figure 3-20), you can click the SAVE
button to apply the new configuration settings and click the Restart
button to take effect the previous configuration changes.
Hint: It needs to take about 10 seconds for the AP to complete the
restart process.
Figure 3-19