User's Manual

24
3.3 Configure Wireless related parameters
Configure IEEE 802.11b WLAN parameters (as shown in Figure 3-11)
Click Basic Config, select Wireless LAN page. In here, enter the Channel
(default is 1), rts Threshold (default is 250), frag Threshold (default is
1600), SSID (default is wireless) and Station Name (default is ap) that are
suitable for your radio network and then you can clicked radio button to
disable WEP or enable 64/128 bit WEP services (default is disable), if
WEP is enabled, you must input corresponded Default Key index and WEP
Key. After that, click FINISH at the bottom of this page to complete the
modification of this page.
Figure 3-11
25
3.4 Security
3.4.1 WEP encryption
1. Click Basic Config, select Wireless LAN page, and configure it to
disable or enable 64/128 bit WEP services (default is Disable) as
shown in Figure 3-11.
2. Key-in the WEP Key and specify which WEP Key id you want to use it.
After that, click FINISH at the bottom of this page to generate the real
WEP key complete the modification of this page.
Hint: If you enable WEP services on AP, all of the communication
between stations to AP will be encrypted. You must make sure all
wireless clients with the same WEP key.
3.4.2 Hide the SSID
Click Basic Config, select Wireless LAN page, and click Yes or No to
choose enable/disable the Hide SSID function on this wireless page (default
is No), as shown in Figure 3-11.
Hint: If you enable Hide SSID on AP, all of the client stations must to
specify the SSID of this AP, otherwise your client stations can’ t see
(survey) this AP if using any Site Survey tools.
3.4.3 Deny ‘ ANY’ client station
Click Basic Config, select Wireless LAN page, and click Yes or No to
choose enable/disable the Deny ‘ ANY’ function on this wireless page
(default is No), as shown in Figure 3-11.
Hint: If you enable Deny ANY on AP, all of the client stations can’ t use
the well define SSID keyword ‘ ANY’ or ‘ any’ .