User's Manual

Version 1.01
40
Chapter 5. Monitor Information
User can find the system running status and other information on this
window. Click the Running Status link on the left window, use can choose
which function that he wants to monitor.
5.1 System Information
By selecting “Running Status/System Info”, enter the System
Information page as the figure shown below.
In this page, user can find the system information and most of the running
parameters.
 General System Information
The following information can be found in this block.
9 Product Model
9 Host Name
9 Software Version
9 Build (Built by)
9 Boot Code Version
Version 1.01
41
9 Web Version
9 AP Firmware version
9 System Uptime
 General System Status
The following information can be found in this block.
9 Operation Mode
9 Interface IP/Net mask
9 Brief wireless parameters
If the DHCP or PPPoE services is enabled, user can also see the related
information here.
 Services Information
This block shows whether the following services are enabled or disabled.
9 NAPT
9 SNMP
9 MAC Filter
9 WEP encryption.