User's Manual

2.4.4 Set SF-3000’s Operating Mode, IP Address, Subnet
Mask, Default Route IP, DNS Server IP
- Operation Mode
When setting up SF-3000, you have to decide which Operation Mode that
your SF-3000 works. This feature is available in the “/General
Config/System/” page as shown in following:
- Web Configuration Structure
The web configuration user interface be grouped in a tree structure, and
contains the following settings or information:
▽ General Configuration
● System
● TCP/IP
－ Virtual Server
－ SNMP
- Host Information
● Wireless
The Host Name is not an essential setting, but it helps identify the device in
network. Use this setting to assign a name to the device.
● Security
－ MAC Filter
- Bridge IP Address Information
▽ Running Status
Use this setting to assign or change the bridge’s IP address.
● System Info
● Statistic Info
- Bridge Subnet Mask
● Wireless Link Info
Enter an IP subnet mask to identify the sub network so the IP address can
be recognized on the LAN.
▽ Utility
● Software Upgrade
- Default Route IP
● Administration
Enter the default Gateway IP Address.
Move through the tree by clicking on an icon to expand or collapse the tree.
The nodes on the tree represent web pages that allow you to view and
modify the parameters.
- DNS Server IP
Enter the Primary/Secondary DNS Server IP Address.
Version 1.00
10
Version 1.00
11