User's Manual

Version 1.00

4.6.2 Administration

You can specify the MAC address of a wireless client station. All MAC

entries in the MAC address table are permitted to connect into the RB. You

can also click ADD, DELETE, MODIFY button to maintain this MAC

address table. After that, click FINISH at the bottom of this page to

complete the modification of this page.

1. Click Utility, Administration. The following figure shows the Utility –

Administration page.

4.6 Utility

4.6.1 Software Upgrade

1. Click Utility, select Software Upgrade page as shown in following

figure, and then you can use TFTP to upgrade your AP. In here, you must

specify the TFTP server IP and select which file you want to upgrade it

(Program image, Web image), then click OK button to start the TFTP

upgrade process.

2. If the upgrade process is success, the AP will apply the new settings and

start rebooting right away.

Hint: You must set up a TFTP server and this server must contain one