User's Manual

Alias name of this internal server, such as FTP.
Version 1.00
27
- Access Interface
Indicate the translation occurs on which interface (Wireless interface /
Ethernet interface), such as Ethernet.
- Protocol
Indicate which protocol (TCP/UDP) you want to translate from outside to
internal server, such as TCP.
Public Access Port number: Indicate which socket port (1 ~ 65535) you
want to translate from outside to internal server, such as 21.
Virtual Server IP address: Specify the private IP address of the internal
server, such as 192.168.1.100.
Virtual Server Port number: Specify the socket port (1 ~ 65535) of the
internal server, such as 21.
3. Click OK . The Virtual Server Entry Table appears with the entries list.
4.3.1 Configure Community Pool
4. To modify or delete a virtual server entry, click the select button beside
the entry index number and click Modify or Delete .
The SNMP Community Pool has five entries.
1. To modify a entry, click the select button beside the entry index
number and then click Modify , the configuration page appears as
following figure.
5. To add another entry to the Virtual Server Mapping Pool, repeat step 1
through step 3.
1. When you have included all the entries you need, click FINISH .
4.3 Configure SNMP
Select the “/General Config/ TCP/IP/SNMP”, and then the SNMP screen
appears. The following figure shows the current SNMP community pool and
trap host pool.
Version 1.00
26