User Manual

SF-300CB

2/14

SendFar is the registered trademark of SendFar Technology Co., Ltd..

1. Introduction

This chapter describes the package contents, system requirements, features and

benefits, applications and network configurations of SF-300 Wireless Access Bridge.

1.1 Package Contents

The SF-300 package contains the following item as shown in Figure.

1. One (1) SF-300 Wireless Access Bridge

2. One (1) 5dBi Omni rubber antenna

3. One (1) 1m RJ-45 CAT 5 Ethernet cable

4. One (1) 1m RS-232 Console Port Cable

5. One (1) 24V, 0.83A AC/DC adapter with wall-plug power cord

6. One (1) Inline power (PoE) injector

7. One (1) User manual CD-disc

8. One (1) set of wall mounting screws

1.2 Product Descriptions

The SF-300 Wireless Access Bridge is a fully interoperable with IEEE802.11b

compliant product for wireless LAN system requires the use of this Wireless Access

Bridge. The Wireless Access Bridge extends wireless networking capability to desktop

PC, printer, scanner, medical equipment, manufacturing machinery, bar code data

collection and other data collection device. It provides a reliable, cost-effective

interface between device utilizing Ethernet ports and wireless LAN Access Point. The

Wireless Access Bridge can move freely under the coverage area of the Access Point

while remaining connected to the Ethernet network.

1.3 Product Features

z High RF Output Power 19dBm (typical)

z Power-over-Ethernet

z User authentication in Web-based manager

z MAC address based access control

z Wireless 64-/128-bit WEP encryption

z SNMP, SNMP MIB-II and proprietary MIBs (See the definition of the proprietary

MIBs in Appendix A)

1.4 System Requirements

Installation of the Wireless Access Bridge requires:

1. A Windows-based PC/AT compatible computer or Ethernet data device with an

available RJ-45 Ethernet port to run the configuration program or with TCP/IP

connection to the Ethernet network.

2. A 10/100Base-T Ethernet RJ-45 Ethernet cable is connected to Ethernet network.

3. A RS-232 Consol Port cable is connected to PC/AT compatible computer.

4. An AC power outlet (100~240V, 50~60Hz) supplies the power.

1.5 Features and Benefits

Features Benefits

11Mbps data rate High-speed data transmission