User Guide

Quick Start Guide VB330-APPLIANCE
Form 8224 Version 7.0 - August 2022 Page 4
Configuring Video Input IP Ports
The IP addresses of the primary and secondary video IP ports on the VB330-
Appliance can configured using the Networking link on the Admin web UI once a
web connection to the management port has been established.
http://<Management IP>/admin
The default username is root and the password is mpeg101.
Figure 6: VB330-Appliance Admin Web UI
Define Input Streams in the VB330-Appliance
Input streams should be defined in the VB330-Appliance so that they can be
monitored. The streams to be monitored are defined in the Multicasts –
Streams tab in the VB330-Appliance web UI.
http://<Management IP>/probe
Verify Correct Operation
Once everything is configured for analysis, the results can be viewed by clicking
the Multicasts – Parameters tab. Refer to the full user manual for more details
on the analysis capabilities.
Figure 7: VB330-Appliance Analysis UI
Support
Contact Sencore ProCare for support, if required.
Email:
[e-mail]
Phone: [phone]