User manual

MRD 3187B User Manual
Page 94
MPEG/IP 1-3
FEC:Off
RTP
► SSRC Setup:User
MPEG/IP 1-3
RTP
SSRC Setup:User
► SSRC:0x00000000
MPEG/IP 1-3
SSRC Setup:User
SSRC:0x00000000
►DiffServ:Default
MPEG/IP 1-3
FEC:Col & Row
► Rows(D):004
Columns(L):001
1. Use the and buttons to move the
cursor to, “Rows(D):” then press the
button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the rows value, then press
the button to save the selection.
3. Use the and buttons to move the
cursor to, “Columns(L):” then press the
button.
4. Use the and buttons to select the
column to edit and use the and
buttons to change the columns value, then
press the button to save the selection.
Synchronization Source Setup Type
1. Use the and buttons to move the
cursor to, “SSRC Setup:” then press the
button.
2. Use the and buttons select the
desired type of SSRC Setup (Auto, User),
then press the button to save the
selection.
Synchronization Source Setup
Note: This option will only be available if the SSRC
SETUP is set to, “User.”
1. Use the and buttons to move the
cursor to, “SSRC:” then press the
button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the SSRC, then press the
button to save the selection.
Differentiated Services
1. Use the and buttons to move the
cursor to, “DiffServ:” then press the
button.
2. Use the and buttons to select the
desired differentiated services (Default,