User manual

MRD 3187B User Manual
Page 93
MPEG/IP 1-3
Transmit:Enabled
►IP:000.000.000.000
Dest Port:00000
MPEG/IP 1-3
Transmit:Enabled
IP:000.000.000.000
►Dest Port:00000
MPEG/IP 1-3
Transmit 2
Transmit 3
►Global Settings
MPEG/IP 1-3
►FEC:Off
RTP
SSRC Setup:Auto
MPEG/IP 1-3
IP:000.000.000.000
Dest Port:00000
►RTP:Enabled
IP
1. Use the and buttons to move the
cursor to, “IP:” then press the button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the IP, then press the
button to save the selection.
Destination Port
1. Use the and buttons to move the
cursor to, “Dest Port:” then press the
button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the destination port (1025 –
65536), then press the button to save the
selection.
RTP
1. Use the and buttons to move the
cursor to, “RTP:” then press the button.
2. Use the and buttons to enable or
disable RTP, then press the button to
save the selection.
Global Transmit Settings
1. Use the and buttons to move the cursor
to, “Global Settings,” then press the button.
Forward Error Correction
1. Use the and buttons to move the
cursor to, “FEC:” then press the button.
2. Use the and buttons to select the
desired FEC type (Off, Col & Row, Col
only), then press the button to save the
selection.
Rows(D) and Columns(L)
Note: These settings will only be available if FEC
is enable, either Col & Row or Col only, in
the above steps.