User manual

MRD 3187B User Manual
Page 71
SDI Anlg Video 2-1
Video
►HD SDI VANC Assign
SD SDI VANC Assign
SDI VANC 1-1
ADP
► EIA-608CC:Disabled
Line:9
SDI Anlg Video 2-1
Video
HD SDI VANC Assign
►SD SDI VANC Assign
SDI VANC 1-1
ADP
► EIA-608CC:Disabled
Line:9
SDI Anlg Video 2-1
►CMPST VBI Assignment
HD Genlock Offset
SD Genlock Offset
Cmpst VBI 2-1
NTSC
► Line21 CC: Enabled
HD SDI VANC Embedding
1. Use the and buttons to move the cursor
to, “HD SDI VANC Assign,” then press the
button to view the Status screen.
2. Press the button once more to display the
Edit menu.
3. Use the and buttons to move the cursor
to the desired type of closed captioning (EIA-
608CC: or EIA-708CC:), then press the
button.
4. Use the and buttons to choose
“Enabled or Disabled” then select the
“Line” on which to embed the captioning. Press
the button to save the selection.
SD SDI VANC Embedding
1. Use the and buttons to move the cursor
to, “SD SDI VANC Assign,” then press the
button to view the Status screen.
2. Press the button once more to display the
Edit menu.
3. Use the and buttons to move the cursor
to the desired type of closed captioning (EIA-
608CC: or EIA-708CC:), then press the
button.
4. Use the and buttons to choose
“Enabled or Disabled” then select the
“Line” on which to embed the captioning. Press
the button to save the selection.
Composite VBI Assignment
To setup Line 21 Closed Captions on the Composite
output of this card use the following steps:
1. Use the and buttons to move
the cursor to, “Cmpst VBI
Assignment,” then press the
button.
1. To Enable or Disable “Line 21 CC” press
the button on the selected option.
2. Then use the and buttons to toggle
between Enabled and Disabled.
3. Press the button to save changes.