User manual

MRD 3187B User Manual
Page 70
SDI Anlg Video 2-1
Format: 1920x1080i
16x9 29.97
►Disp Mode: Letterbox
SDI Anlg Video 2-1
Anlg Out:RGBHV
NTSC Ped:Disabled
►Raster Color:Black
SDI Anlg Video 2-1
►Disp Mode: Letterbox
SD Mode: Anamorph
SDI
SDI Anlg Video 2-1
Analog
Anlg Out:RGBHV
► NTSC Ped:Disabled
Composite), then press the button to
save the selection.
3. Use the and buttons to move the
cursor to, “NTSC Ped:” then press the
button.
4. Use the and buttons to Enable,
or Disable the “NTSC Ped:” then press
the button to save the selection.
Display Mode
1. Use the and buttons to move the
cursor to, “Disp Mode:” then press the
button.
2. Use the and buttons to select the
desired output size (Letterbox,
Cropped), then press the button to save
the selection.
SD Mode
1. Use the and buttons to move the
cursor to, “SD Mode:” then press the
button.
2. Use the and buttons to select the
desired output size (Letterbox,
Cropped, Anamorph), then press the
button to save the selection.
Raster Color
This setting determines the color of the raster that
is output by the decoder when input is lost.
1. Use the and buttons to move the
cursor to, “Raster Color:” then press the
button.
2. Use the and buttons to select the
desired raster color (Black, White,
Yellow, Cyan, Green, Magenta,
Red, Blue), then press the button to
save the selection.