User manual

MRD 3187B User Manual
Page 61
DVB-S/S2 2-2
►Selected I/O: no
Source: A
Input A
DVB-S/S2 2-2
DVB Mode: DVB-S2
► Freq: 1250.0 MHz
Sym Rt: 27.0000 MSps
DVB-S/S2 2-2
Selected I/O: yes
►Source: A
Input A
DVB-S/S2 2-2
Input A
► DVB Mode: DVB-S2
Freq: 1250.0 MHz
4. Press the button once to display the Status
screen for the DVB-S/S2 card.
5. Press the button again to display the Edit
screen for the DVB-S/S2 card.
6. Use the and buttons to move the cursor
to, “Selected I/O:” then press the
button.
7. Use the and buttons to change the
selection to, “yes,” then press the button.
Source
This option will select which input, on the back of
the card, will be active.
1. Use the and buttons to move the cursor
to, “Source:” then press the button.
2. Use the and buttons to select which
input to be active (A, B), then press the
button to save the selection.
Input A
These settings correspond to the input on “Source A.”
DVB Mode
The DVB-S/S2 card can receive either DVB-S or
DVB-S2 transmission.
1. Use the and buttons to move the
cursor to, “DVB Mode:” then press the
button.
2. Use the and buttons to select either
(DVB-S, DVB-S2), then press the
button to save the selection.
Frequency A
The DVB-S/S2 card tunes by the L-band frequency rather than the transponder frequency
or local oscillator value. The L-band frequency is the difference between the downlink
transponder frequency and the LNB local oscillator frequency.
1. Use the and buttons to move the
cursor to, “Freq:” then press the button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the frequency (950MHz –
2150MHz), then press the button to
save the selection.