User manual

MRD 3187B User Manual
Page 58
SD SDI Video 2-1
NTSC Waveforms
► Line21CC:Enabled
AMOL:Disabled
SD SDI Video 2-1
PAL Waveforms
► TTX:Enabled
VPS:Disabled
SD SDI Video 2-1
Auto AFD:Disabled
SDI VANC Assign
►Cmpst VBI Assignment
SD SDI VANC 2-1
ADP
EIA-608CC:Disabled
► Line:9
captioning (EIA-608CC, EIA-708CC,
TTX S2031M, Source ID, or 127
S2031M), then press the button.
2. Use the and buttons to choose
“Enabled or Disabled” then select
the “Line” on which to embed. Press the
button to save the selection.
Note: Repeat steps 1-4 above to change EIA-
708CC, TTX S2031M, Source ID, and 127
S2031M.
NTSC Waveforms
To enable NTSC items, use the following
steps.
1. Use the and buttons to move
the cursor to, “Line21CC:” then press
the button.
2. Use the and buttons to enable
or disable “Line21CC”, then press the
button to save the selection.
Note: Repeat steps 1-2 above to change AMOL,
and TVG2x.
PAL Waveforms
To enable PAL items, use the following steps.
1. Use the and buttons to move
the cursor to, “TTX:” then press the
button.
2. Use the and buttons to enable
or disable “TTX”, then press the
button to save the selection.
Note: Repeat steps 1-2 above to change VPS,
and WSS.
Composite VBI Assignment
To edit the Composite VBI Assignment, use the
following steps.
1. Use the and buttons to move the
cursor to, “Cmpst VBI Assignment” then
press the button to display the status
screen for the VBI.