User manual

MRD 3187B User Manual
Page 56
SDI Video 2-1
Video Loss Mode:
Display Raster
►Auto AFD:Disabled
SD SDI Video 2-1
Video
HD Settings
►SD Settings
SDI VANC 2-1
ADP
► EIA-608CC:Disabled
Line:9
SDI Video 2-1
Display Raster
Auto AFD:Disabled
►SDI VANC Assign
Output), then press the button to save
the selection.
Auto AFD
1. Use the and buttons to move the
cursor to, “Auto AFD:” then press the
button.
2. Use the and buttons to enable or
disable AFD, then press the button to
save the selection.
SDI VANC Assignment
To edit the SDI VANC Assignment, use the
following steps.
1. Use the and buttons to move the
cursor to, “SDI VANC Assign” then press
the button to display the status screen
for the VANC.
2. Press the button once more to enter the
Edit screen.
ADP
To enable items in the VANC and assign a
line for each item, use the following steps.
1. Use the and buttons to move the
cursor to the desired type of closed
captioning (EIA-608CC, EIA-708CC,
TTX S2031M, Source ID, or 127
S2031M), then press the button.
2. Use the and buttons to choose
“Enabled or Disabled” then select
the “Line” on which to embed. Press the
button to save the selection.
Note: Repeat steps 1-4 above to change EIA-
708CC, TTX S2031M, Source ID, and 127
S2031M.
SD Settings
1. Use the and buttons to move the cursor
to, “SD Settings,” then press the button
to display the Status screen for the SD video
output settings.
2. Press the button again to display the Edit