User manual

MRD 3187B User Manual
Page 55
SDI Video 2-1
►Disp Mode: Pillarbars
Video Loss Mode:
Display Raster
SDI Anlg Video 2-1
Analog
Anlg Out:RGBHV
► NTSC Ped:Black 0
SDI Anlg Video 2-1
Anlg Out:RGBHV
NTSC Ped:Disabled
►Raster Color:Black
SDI Video 2-1
Video
►HD Settings
SD Settings
SDI Video 2-1
Disp Mode: Pillarbars
►Video Loss Mode:
Display Raster
3. Use the and buttons to move the
cursor to, “NTSC Ped:” then press the
button.
4. Use the and buttons to change the
“NTSC Ped:” to either “Black 0” or “Black
7.5”, then press the button to save the
selection.
Raster Color
This setting determines the color of the raster that
is output by the decoder when input is lost.
1. Use the and buttons to move the
cursor to, “Raster Color:” then press the
button.
2. Use the and buttons to select the
desired raster color (Black, White,
Yellow, Cyan, Green, Magenta,
Red, Blue), then press the button to
save the selection.
HD Settings
1. Use the and buttons to move the cursor
to, “HD Settings,” then press the button
to display the Status screen for the HD video
output settings.
2. Press the button again to display the Edit
screen for the HD video output settings.
Display Mode
1. Use the and buttons to move the
cursor to, “Disp Mode:” then press the
button.
2. Use the and buttons to select the
desired output size (Pillarbars,
Cropped), then press the button to save
the selection.
Video Loss Mode
1. Use the and buttons to move the
cursor to, “Video Loss Mode:” then press
the button.
2. Use the and buttons to choose
between (Display Raster, Disable