User manual

MRD 3187B User Manual
Page 43
Overlay 1
Type: Service
►Overlay: Service Info
Output
SDI VANC Assignment
Overlay
►Small Format Disp
SFD 1-1
►Format:1920x1080i
16x9 29.97
SFD Location:Top-Lt
SFD 1-1
Format:1920x1080i
16x9 29.97
►SFD Location:Top-Lt
to the appropriate offset, then press the
button to save the selection.
Overlay (Service)
Note: This option only displays the Service Info.
Small Format Display
To setup the MRD 3187B to output a “Small Format
Display,” use the following steps:
1. Use the and buttons to move the cursor
to “Small Format Disp,” then press the
button.
2. Press the button again to change the
settings.
Format
1. While the cursor is on “Format:” press the
button to change the display format.
2. Use the and buttons to change
from any of the following settings:
720x480i 16x9 29.97 1920x1080i 16x9 25.00
720x480i 4x3 29.97 1920x1080i 16x9 29.97
720x576i 16x9 25.00 1920x1080i 16x9 30.00
720x576i 4x3 25.00 1920x1080p 16x9 23.98
1280x720p 16x9 50.00 1920x1080p 16x9 24.00
1280x720p 16x9 59.94 1920x1080p 16x9 25.00
1280x720p 16x9 60.00 1920x1080p 16x9 29.97
1920x1080p 16x9 30.00
3. Press the button to save the settings.
SFD Location
1. Use the and button to move the
cursor to “SFD Location:” and then press
the button.
2. Use the and buttons to select one
of the following options:
Top-Lt Mid-Lt Btm-Lt
Top-Rt Mid-Rt Btm-Rt
Top-Ctr Mid-Ctr Btm-Ctr
3. Press the button to save the settings.