User manual

MRD 3187B User Manual
Page 41
HD Video 2-1
SDI VANC Assignment
►Overlay
Genlock Offset
Overlay 2
Type: Closed Caption
►Overlay: NTSC
NTSC Srvc: 1
Overlay 2
►Type: Closed Caption
Overlay: NTSC
NTSC Srvc: 1
Overlay 2
Type: Closed Caption
Overlay: NTSC
►NTSC Srvc: 1
Overlay 2
Type: Closed Caption
Overlay: DTVCC
►DTVCC Srvc: 1
CAUTION: All overlays will appear on the
downstream video.
1. Use the and buttons to move the cursor
to, “Overlay,” then press the button.
Type of Overlay
1. Use the and buttons to move the
cursor to, “Type:” then press the button.
2. Use the and buttons to select which
overlay to display (Closed Caption,
Service, Table) then press the
button to save the selection.
Overlay (Closed Caption)
Note: This menu changes depending on which
overlay is set in “Type of Overlay” above.
1. Use the and buttons to move the
cursor to, “Overlay:” then press the
button.
2. Use the and buttons to select the
appropriate type of overlay (NTSC, DTVCC,
OFF), then press the button to save the
selection.
Closed Caption Number
NTSC
Note: This option will only be available if the TYPE
of overlay is set to, “Closed Caption” and
the OVERLAY is set to “NTSC.”
1. Use the and buttons to move the
cursor to, “NTSC Srvc:” then press the
button.
2. Use the and buttons to select the
desired number of closed caption to view (1-
4), then press the button to save the
selection.
DTVCC
Note: This option will only be available if the
TYPE of overlay is set to, “Closed
Caption” and the OVERLAY is set to
“DTVCC.”