User manual

MRD 3187B User Manual
Page 39
HD Video 2-1
Select Format: manual
►Format: 1920x1080i
16x9 29.97
HD Video 2-1
Format: 1920x1080i
16x9 29.97
►Anlg Out: RGBHV
HD Video 2-1
16x9 29.97
Anlg Out: RGB
►Disp Mode: Letterbox
Video Format
Note: This menu is only available if the “Select
Format” option is set to “manual.”
1. Use the and button to move the
cursor to, “Format:” then press the
button.
2. Use the and buttons to select the
desired output format, then press the
button to save the selection.
720x480i 16x9 29.97 1920x1080i 16x9 25.00
720x480i 4x3 29.97 1920x1080i 16x9 29.97
720x576i 16x9 25.00 1920x1080i 16x9 30.00
720x576i 4x3 25.00 1920×1080p 16×9 23.98*
1280x720p 16x9 50.00 1920×1080p 16×9 24.00*
1280x720p 16x9 59.94 1920×1080p 16×9 25.00*
1280x720p 16x9 60.00 1920×1080p 16×9 29.97*
1920×1080p 16×9 30.00*
* indicates that this setting is only available for the 8730A/8732
Note: “If either 480i or 576i video format is used the HD-SDI outputs are turned off and
only the analog output is enabled.
Analog Output Format
Note: If this setting is set incorrectly when using
an RGB monitor, the image will appear
green. If this setting is set incorrectly when
using a Component monitor, there will be no
video on the monitor.
1. Use the and buttons to move the
cursor to, “Anlg Out:” then press the
button.
2. Use the and buttons to select the
desired output format (RGBHV, YPbPr),
then press the button to save the
selection.
Display Mode
1. Use the and buttons to move the
cursor to, “Disp Mode:” then press the
button.