User manual

MRD 3187B User Manual
Page 32
SD Video 1-1
NTSC Ped:Disabled
►SDI Clk:Pass on Fail
Format: 720x480i
SD Video 1-1
SDI Clk:Pass on Fail
►Format: 720x480i
4x3 29.97
SD Video 1-1
Format: 720x480i
4x3 29.97
►Disp Mode: Letterbox
SD Video 1-1
4x3 29.97
Disp Mode: Letterbox
►Auto AFD: Disabled
SDI Clock
This option sets how the SDI clock behaves upon
input failure. Pass on Fail will continue to send
the SDI clock and show the selected raster color
on the SDI outputs. Squelch will stop the SDI
clock and any equipment down the line will lose
SDI input.
1. Use the and buttons to move the
cursor to, “SDI Clk:” then press the
button.
2. Use the and buttons to set the
desired SDI clock mode (Pass on Fail,
Squelch), then press the button to
save the selection.
Video Format
1. Use the and buttons to move the
cursor to, “Format:” then press the
button.
2. Use the and buttons to select the
appropriate format, then press the
button to save the selection.
720x480i 4x3 29.97
720x480i 16x9 29.97
720x576i 16x9 25.00
720x576i 4x3 25.00
Display Mode
1. Use the and buttons to move the
cursor to, “Disp Mode:” then press the
button.
2. Use the and buttons to select the
appropriate display mode (Letterbox,
Cropped, Anamorph), then press the
button to save the selection.
Auto AFD
1. Use the and buttons to move the
cursor to, “Auto AFD:” then press the
button.
2. Use the and buttons to select the
appropriate mode (Enabled or Disabled),
then press the button to save the
selection.