User manual

MRD 3187B User Manual
Page 2
WARNING
PLEASE OBSERVE THESE SAFETY PRECAUTIONS
There is always a danger present when using electronic equipment.
Unexpected high voltages can be present at unusual locations in defective equipment and signal
distribution systems. Become familiar with the equipment that you are working with and observe the
following safety precautions.
Every precaution has been taken in the design of your MRD 3187B to ensure that it is as
safe as possible. However, safe operation depends on you the operator.
Always be sure your equipment is in good working order. Ensure that all points of
connection are secure to the chassis and that protective covers are in place and secured
with fasteners.
Never work alone when working in hazardous conditions. Always have another person
close by in case of an accident.
Always refer to the manual for safe operation. If you have a question about the
application or operation call SENCORE for assistance.
Never allow your equipment to be exposed to water or high moisture environments. If
exposed to a liquid, remove power safely (at the breaker) and send your equipment to be
serviced by a qualified technician.
When installing the MRD 3187B utilizing the DC power supply, the power supply
MUST be used in conjunction with an over-current protective device rated at 50V, 5A,
type: Slow-blo, as part of battery-supply circuit.