User manual

MRD 3187B User Manual
Page 184
Audio Output (DolbyE, AES Digital, Analog) – Option 8707A
General –
RoHS Compliant: Yes
Audio Source: Selected Audio Services 1-4
# Of Services: 2 supported per 8707A option card
Service Source: MRD Configuration 1 Opt 1/3 (2 services)
MRD Configuration 1 Opt 2/4 (4 services)
(Requires 2 – 8707A cards)
Modes: User defined, Monitor, Transmission
DolbyE PID: DolbyE extracted digital data output provides
extracted DolbyE for embedding
Digital Audio Out –
DolbyE: Available with breakout cable on 15-pin D-sub
Connector
Digital Output format: S/PDIF/AES3id (Unbalanced)
Type (selectable): Raw (native – AC3, MPEG, etc.),
PCM (uncompressed Ch1 and 2),
Standard: IEC 60958-3 AC-3 (consumer),
MPEG-1/2, layers 1 and 2
AES3id (IEC 60958-4/61937), Ch1/2 (professional)
Connector: (2) BNC, female
Impedance: 75ohms
Analog Audio Out -
Output Type: Balanced, 2 channel pairs (+/-, L/R)
Source: Same as selected Digital PCM above
Conditions: Load=600ohms,
–20dBFS encoded TS source when gain set to “7”
Amplitude: 0dBu
Adjustable to +4dBu
Max Output: 27dBu
THD+N: <0.01%
Crosstalk: <-85dB
Frequency Response: 20Hz to 20KHz < +/-0.1dBu
Connector: High density 15-pin D-sub, male
Impedance: 600ohms nominal
50ohms min.
Options available –
8707A Opt 1: Audio breakout cable with XLR and DolbyE BNC
Connectors: (4) XLR, male; Chan 1 – L,R Chan 2 – L,R
(1) BNC, male; DolbyE
(1) High density 15-pin D-sub, female
Length: 14 inches
8707A Opt 3: Audio breakout cable with unbalanced BNC and
DolbyE BNC
Connectors: (5) BNC, male; Chan 1 – L,R Chan 2 – L, R DolbyE
(1) High density 15-pin D-sub, female
Length: 14 inches
8707A Opt 4: DolbyE breakout cable
Connectors: (1) BNC, male; DolbyE
(1) High density 15-pin D-sub, female
Length: 14 inches
Specifications are subject to change without notice.