User manual

MRD 3187B User Manual
Page 182
Video Output (1 RGBHV/YPbPr, 1 Composite) – Option 8706A
Analog Video General –
RoHS Compliant: Yes
Video Standards: SMPTE274M (1080i)
SMPTE296M (720p)
SMPTE253M (480p)
SMPTE170M (480i)
(Reference: EIA 770.2 and 770.3)
Output Formats: 1920 x 1080 Interlaced (1080i)
1280 x 720 Progressive (720p)
720 x 576 Interlaced (576i)
720 x 480 Interlaced (480i)
Frame Rates: 1080i@ 25.00Hz, 29.97Hz, 30.00Hz
720p@ 50.00Hz, 59.94Hz, 60.00Hz
576i@ 25.00Hz
480i@ 29.97Hz
Aspect Ratio: 16x9 (fixed: 1080i, 720p)
16x9, 4x3 (selectable: 576i, 480i)
Display Modes: HD: Letterbox, Cropped
SD: Letterbox, Cropped
Composite General –
Standard: ANSI/SMPTE 170M-1994
CCIR656
PAL Standard
Output Formats:
NTSC: 480 Interlaced
PAL: 576 Interlaced
Note: Simultaneous RGB/YPbPr and Composite operation in 480i29.97Hz format only.
Analog Video –
Number of Outputs: 1 (shared: RGBHV and YPbPr)
Connector: High Density 15-pin D-sub, female
Impedance: 75ohms, +/-10%; 1kohm for syncs
Return Loss: >20dB, 30KHz – 30MHz
Frequency Response: Y = 30KHz - 30MHz, +/-0.2dB ripple
PbPr = 30KHz – 15MHz, +/-0.2dB ripple
H/V Sync: 4Vpp into 1Mohm, negative polarity
Specifications are subject to change without notice.