User manual

MRD 3187B User Manual
Page 180
Video Output (2 HD-SDI, 1 RGBHV/YPbPr) – Option 8705/8705A
General -
RoHS Compliant: Yes
Output Connectors: 2 – HD-SDI, 1 – Analog Video
Output Formats: 1920 x 1080 Interlaced (1080i)
1280 x 720 Progressive (720p)
720 x 576 Interlaced (576i)
720 x 480 Interlaced (480i)
Frame Rates: 1080i@ 25.00Hz, 29.97Hz, 30.00Hz
720p@ 50.00Hz, 59.94Hz, 60.00Hz
576i@ 25.00Hz
480i@ 29.97Hz
Aspect Ratio: 16x9 (fixed: 1080i, 720p)
16x9, 4x3 (selectable: 576i, 480i)
Display Modes: HD: Letterbox, Cropped
HD-SDI –
Standard: SMPTE 292M
Data Bit Rate: 1.485Gbps
Number of Serial Outputs: 2
Connector: (2) BNC, female
Impedance: 75ohms, +/-10%
Return loss: >=15dB,
Number of Video formats Supported: 2
Video Format Standards: SMPTE 274M (1080I, 29.97Hz)
SMPTE 296M (720P, 59.94Hz)
Embedded Audio Format: SMPTE 299M
Sample Rates Supported: 48KHz
Sample Rate Output: 48KHz
Number of Embedded Audio Channel Pairs: 4 (2 complete audio groups)
Audio Types Supported: AC3, MPEG2 layer 1 and 2, or PCM
DolbyE (With 8707A)
Embedded Audio Control: Selectable – “type” and disable
(Each pair independently controlled)
Audio Type Standard: Compressed (IEC 60958)
Uncompressed (IEC 61937)
Closed Captions: Embedded - EIA-708B or EIA-608B
Enable/Disable – selectable
Analog Video –
Video Format Standards: SMPTE274M (1080i)
SMPTE 296M (720p)
SMPTE 253M (480p, 480i)
(Reference: EIA 770.2 and 770.3)
Number of Analog Outputs: 1 (shared: RGBHV and YPbPr)
Connector: High Density 15-pin D-sub, female
Impedance: 75 ohms, +/-10%, 1kohm for syncs
Return Loss: >20dB, 30KHz – 30MHz
Frequency Response: Y = 30KHz - 30MHz, +/-0.2dB ripple
PbPr = 30KHz – 15MHz, +/-0.2dB ripple
H/V Sync: 4Vpp into 1 M ohm, positive polarity
Genlock -
HD-SDI: Line and Pixel Adjustment
Specifications are subject to change without notice.