User manual

MRD 3187B User Manual
Page 179
Video Output (2 SD-SDI, 1 Composite) – Option 8704A/8704B
SDI (Serial Digital Interface, Standard definition) –
RoHS Compliant: Yes
Standard: ITU-BT.601/SMPTE 259M
Data Bit Rate: 270Mbps
Number of Serial Video Outputs: 2 (Isolated)
Display Modes: Letterbox, cropped, anamorphic
Embedded Audio Format: SMPTE272M
Sample Rates Supported: 48KHz
Sample Rate Out: 48KHz
Output Squelch: Enable, (Output muted if no input detected)
Disable, selectable
Number of Embedded Audio Channel Pairs: 4 (2 complete audio groups)
Audio Types Supported: DolbyE, AC3, MPEG2 layer 1 and 2, or PCM
Embedded Audio Control: Selectable – “type”/disable
(each pair independently controlled)
Audio Type Standard: Compressed (IEC 60958)
Uncompressed (IEC 61937)
Closed Captions: Embedded - EIA-708B or EIA-608B
Line21 – Enable/Disable (selectable) SDI and
Composite controlled simultaneously.
Connector: (2) Female BNC
Impedance: 75ohms
Composite Video Out –
Number of Outputs: 1 (NTSC/PAL)
Connector: BNC, female
Impedance: 75ohms, +/-10%
Return Loss: >25dB
Frequency Response: DC to 6.0MHz
Amplitude: 140 IRE (1.0Vpp), +/-2 IRE
Display Modes: Letterbox, cropped, anamorphic
NTSC -
Standard: ANSI/SMPTE 170M-1994; CCIR656
Format, Frame rate: 525lines, 29.97Hz (Interlaced)
Setup (pedestal): On/Off, selectable
Closed Caption: Enable/Disable, selectable
CC Standard: EIA-608B
PAL -
Standard: ITU.R.BT.470-6
Format, Frame rate: 625lines, 25.00Hz (Interlaced)
Genlock –
SDI: Line and Pixel Adjustment
Composite: Line, Pixel, Color Phase Adjustment
Specifications are subject to change without notice.