User manual

MRD 3187B User Manual
Page 159
5.6 Web Passwords
The password on the web client for the admin account and user account should be changed to
something other than the default passwords. The process is the same for both the admin account
and the user account, just click on the button next to the account of the password to change.
To change either the admin account password or the user account password, use the following
steps:
1. Click on the button next to the account
to edit.
2. A new window will appear in the middle of
the screen. Type the new password in both
of the fields and then click the button
to save the new password.
5.7 Reset Unit
If a problem should ever arise where the MRD 3187B has locked up, or malfunctioned in some
manner, it is possible to perform a soft reset from the web client. A soft reset will reboot the
MRD 3187B and hopefully take care of any previous problems the unit was exhibiting. A soft
reset will not change any setting. To perform a soft reset, use the following steps:
1. Click the “Reset Unit” hyperlink under the “Reset
Unit” heading.
2. A new page will appear. Click the button.
3. A new dialog box will appear asking “Are you sure that you want to reset
the unit?” Click the button to reset the unit.
Caution: Resetting the unit is a service affecting event and service will be interrupted while
the unit is rebooting.
4. A progress bar will appear on the screen as the unit is
resetting. It may take up to 5 minutes for the MRD
3187B to restart depending on the configuration.
5. Once the unit has restarted the web client will be
redirected back to the login page for the MRD 3187B.