User manual

MRD 3187B User Manual
Page 156
5.5 Profiles
Profiles are the means for saving and applying a group of settings on an MRD 3187B for a
particular use. By applying a particular profile, the user can recall the settings of the MRD
3187B for different demodulation and decoding needs.
Up to 24 different profiles can be stored on an MRD 3187B. New profiles can be added to the
unit by configuring the various settings of the MRD 3187B, then “saving” this profile and giving
it a name. New profiles can also be added to an MRD 3187B by transferring them from a PC via
the web client interface. Profiles can be deleted, by name, to make room for others. To
configure profiles, first click on the tab to display the profiles section.
5.5.1 Saving a Profile
Once the MRD 3187B is configured as required for a
specific use and environment, the settings can be
saved to the MRD 3187B by a named profile. To
save a profile, use the following steps:
1. Click the button.
2. Enter a name for the profile.
Note: The profile name should be no more than 15
characters long.
3. Click the button to save the profile.
4. Click the button after the profile has been
successfully saved.