User manual

MRD 3187B User Manual
Page 155
5. If “Manual” is selected, click the
button to choose the date.
6. Then enter the time manually in the space
provided.
7. Click the button to save the
changes.
5.4.4 SNMP Settings
The next section is the SNMP settings. This section gives
an overview of all the SNMP settings as well as the
configuration of SNMP. To edit the SNMP settings use the
following steps:
1. Click the button under the “SNMP Settings”
heading. This will bring up a new edit form in the
middle of the screen.
2. Use the drop down menus and input boxes to configure
SNMP to the desired settings.
3. At the top of the edit form there are five drop down
menus for enabling or disabling five separate SNMP
traps as well.
4. When all of the settings have been configured, click the
button, at the bottom of the form, to save
the settings.
5.4.5 SMPTE333M
To enable SMPTE333M, use the following steps:
1. Click the button next to the SMPTE333M title. This
will bring up a new edit form in the middle of the
screen.
2. Use the drop down menu to enable or disable
SMPTE333M.
3. Click the button, at the bottom of the
form, to save the settings.